Concrete, land clearing, site prep, pools and metal buildings in HoustonConcrete and site work in Houston, TX
Call or text (888) 795-7757 20+ years of experience
SETX Construction
Concrete contractor, land clearing and site prep in Cleveland, TX
Call (888) 795-7757 Request a Quote

How Much Does an Inground Pool Cost in Texas?

National cost guides put a gunite inground pool at about $50,000 to $120,000 installed. One guide’s 2026 average is $100,000 for a 14 by 28 foot pool. A Houston-area builder’s price guide starts near $40,000 and runs to $120,000 or more.

These are market numbers, not our price list. Pool size and the extras move the number the most, and the dig can add to it. Fiberglass and vinyl cost less up front, and national guides give both a shorter life than gunite.

What does a gunite pool cost in Texas?

National guides price a pool by its size and type. One prices gunite at $100 to $280 per square foot of pool, against $90 to $160 for other types.

Published figureKind of sourceRange
Gunite pool, installedNational cost guides$50,000 to $120,000
Gunite pool, 14 by 28 feetNational cost guide, 2026 average$100,000
Gunite, per square foot of poolNational cost guide$100 to $280
Houston pools in generalNational guide’s city table$27,000 to $66,000
Inground pool in HoustonHouston-area builder’s price guide$40,000 to $120,000 or more

That Houston city figure is for pools in general, not gunite alone. The same guide prices concrete pools at $65,000 to $120,000.

SETX Construction builds custom gunite pools on the northeast side of the Houston area. We price each pool from its own design and its own yard.

What raises the price of a gunite pool?

Size comes first. One national guide puts the average inground pool at about 300 to 400 square feet. It runs 6 to 7 feet deep at the deep end. A bigger or deeper pool means more digging and a larger shell.

The extras come next. We build features like a raised spa with a stone face and a spillway. We also build tanning ledges with in-water seats. Both add their own shell and finish work.

FeaturePublished range
Attached spa$8,000 to $25,000, or $6,000 to $15,000 built with the pool
Tanning ledgeAbout $3,000 to $10,000 or more by size, in builder guides
Waterfall or other water feature$450 to $8,800
Pool lights$200 to $625 per light
Pool deck$3,000 to $12,000
Pool fence$5,000 to $15,000

One guide shows that a spa costs less when it goes in with the pool. The deck is priced by the square foot. In one deck table, stamped concrete runs $15 to $30 a square foot in material. Plain poured concrete runs $4 to $8.

SETX Construction pours its own pool decks. It is the same flatwork we pour for concrete patios and driveways.

How do soil and access change the cost of the dig?

National guides price the dig for an inground pool at about $500 to $5,000. One says digging in a hard-to-reach yard can run up to $20,000.

The dirt has to go somewhere, too. Digging a 16 by 32 foot pool that averages 6 feet deep removes about 114 cubic yards of dirt. One guide prices hauling at $8 to $25 per cubic yard.

Soil changes across the northeast side of Houston. Some lots sit on heavy clay, locally called gumbo, that swells when wet and shrinks when dry. Other lots sit on loam or sand, and some of that ground drains poorly.

A Houston-area builder’s guide flags expansive clay and a high water table. It says local pools often need reinforced construction and good drainage. SETX Construction digs its own pools with its own excavators. The same machines handle our excavation work, such as trenches for drain pipe and foundation beams.

How does gunite compare with fiberglass and vinyl?

Gunite costs the most up front because the shell is built in place. It is shot through a hose over a steel cage, then shaped by hand. A fiberglass shell comes finished from a factory mold. A vinyl pool holds its water in a liner.

Pool typeInstalled range in national guidesLife in the guidesBig later cost
Gunite$50,000 to $120,00050 years or moreNew plaster every 10 to 15 years, about $8,000 to $10,000
Fiberglass$25,000 to $100,000About 25 to 30 yearsRefinishing may come at about 10 years
Vinyl liner$20,000 to $80,00020 years or moreNew liner every 6 to 12 years, $3,000 to $7,500

Gunite also costs more to keep up. National guides say its porous surface needs more cleaning and higher chemical levels. What gunite buys is shape. It can be built to nearly any shape, while fiberglass shells come from set molds.

SETX Construction builds gunite pools only, so the fiberglass and vinyl figures here are for comparison.

What are the stages of a gunite pool build?

Most gunite builds follow the same order of work.

  1. Design and layout. The shape and the extras get set, and the outline is marked on the ground.
  2. Permits. Where a permit is required, it comes before the dig.
  3. The dig. Machines dig the hole to the shape and depth of the pool.
  4. Steel and plumbing. A steel cage goes in, and the plumbing lines are set.
  5. The shell. Gunite is shot over the steel and shaped by hand, then it cures.
  6. Tile and the deck. The waterline tile and the coping go on, and the concrete deck is poured.
  7. Equipment and wiring. The pump and filter go in, and a licensed electrician wires the pool.
  8. Finish and fill. The interior finish goes on, and the pool fills with water.

Gunite takes longer to build than fiberglass, since the shell is built in place and has to cure. Weather and inspections set the pace on any build.

What permits and safety rules apply to a pool in Texas?

Texas law requires a call to 811 at least two business days before any dig deeper than 16 inches. Utility companies then mark their buried lines.

Texas has a state pool fence law in Chapter 757 of the Health and Safety Code. It covers pools at rental complexes and pools a property owners association runs.

For a private backyard pool, ask the city permit office which permit and barrier rules apply. Inside Houston, the Houston Permitting Center’s permit finder has a category for swimming pools. Outside city limits, the county engineering or permit office answers that question.

One national guide notes that many cities require a pool fence, and height rules vary by place. Guides put pool permit fees at about $100 to $1,800. Pool wiring and bonding are electrical code work for a licensed electrician.

If your neighborhood has deed restrictions or an owners association, its approval may come first. The City of Houston’s floodplain office issues floodplain development permits for construction in the mapped floodplain.

How do you get a real number for your pool?

Published ranges show the market, and a real number comes from your yard and the pool you want. We look at the site and put the quote in writing after a free estimate. See how we build gunite pools, or call (888) 795-7757.

Frequently asked questions

What is the average cost of a gunite pool?
One national guide puts the 2026 average at $100,000 for a 14 by 28 foot gunite pool. National guides put most gunite pools at about $50,000 to $120,000 installed. The size and the extras set where a pool lands in that range.
Why does a gunite pool cost more than a fiberglass pool?
A gunite shell is built in place over a steel cage and shaped by hand. A fiberglass shell arrives finished from a factory mold. National guides give gunite the longer life, at 50 years or more against about 25 to 30 for fiberglass.
How much does it cost to add a spa to a pool?
One national guide puts an attached spa at $8,000 to $25,000. The same guide lists $6,000 to $15,000 when the spa is built with the pool. Planning the spa from the start costs less than adding it later.
Does a backyard pool in Texas need a permit and a fence?
The state pool fence law covers pools at rental complexes and pools a property owners association runs. For a private backyard pool, the city permit office says which permit and barrier rules apply. Outside city limits, ask the county engineering or permit office.
How long does a gunite pool last?
National guides say a gunite pool lasts 50 years or more. The interior surface wears sooner and needs new plaster every 10 to 15 years. Guides price that job at about $8,000 to $10,000.
Does clay soil change the cost of a pool near Houston?
It can. A Houston-area builder's guide says expansive clay and a high water table often call for reinforced construction and good drainage. That added work shows up in the price. The federal soil survey says soils that shrink and swell can damage buildings and other structures.
Is this what SETX Construction charges?
No. These are market numbers from published guides, not our price list. Each pool is custom, so we look at your yard and put the quote in writing after a free estimate. Call (888) 795-7757 to set one up.
Request a Quote

Get In Touch With SETX Construction

Send the form with the job you have in mind and where the property is. Or call (888) 795-7757 and ask for a free estimate.

  • Call or text (888) 795-7757
  • Serving Houston, TX and the northeast side of the metro
  • Free written estimates · concrete, land work, pools and metal buildings

Request a Quote

Tell us about the driveway, slab, land, pool or metal building and where it is. We look at the job and give you a free estimate in writing.

Call (888) 795-7757